Setting the SSID and password for the DJI Spark Wi-Fi connection

Changing the name of the SSID access point and the Wi-Fi password of the DJI Spark is a simple operation, which requires only a few steps, through the use of the DJI GO 4 app. First we see when you need to set up the Wi-Fi SSID and password of the DJI Spark, and then all the steps to set up the data for the Wi-Fi connection of the DJI Spark

When to reset the SSID and password of DJI Spark?

Make sure Wi-Fi is set to ON. Select the Spark network from the list. Enter the Wi-Fi password, then select Connect. The Wi-Fi password is on the side of the box, and inside the battery. DJI Quick Tips - Spark - Resetting the Wi-Fi SSID and Password.

● To customize the network name and password for accessing your Wi-Fi connection the first time you use it, to replace the factory settings you have set

● If your Android mobile device supports a maximum of 2.4GHz and the Wi-Fi of the DJI Spark drone is not present in the menu of available networks, present on your smartphone

● If you have forgotten your password to access the Wi-Fi network of the DJI Spark drone

How to reset Reset WiFi SSID and DJI Spark password?

RC password is normally 12341234 by default. If you changed it you can hard reset by holding RC power button down for 9 secs. Spark password can be found in battery compartment sticker on A/C. Hope that helps jimlips, Dragonfly Joe and RotorWash. Page 32 Wi-Fi name and password, and reset the Wi-Fi frequency to 2.4 GHz. Or tap “Help” in the DJI GO 4 app, then follow the instructions. Only fly with a Wi-Fi connection in wide open areas with relatively little electromagnetic interference. Page 33 Left Right Turn Left Turn Right The Stick Mode is set to Mode 2 by default.

Method 1: Change the WiFi SSID and password of the DJI Spark by power button

Step 1: Press and hold the power button for 9 seconds, during which the drone will be emitting sounds, in the following sequence: 1 beep, 2 consecutive beeps and 3 consecutive beeps.

Step 2: At this point, the SSID network identifier and password have been reset to the factory settings, whose coordinates can be found directly on the DJI Spark.

Step 3: Check the original SSID network name and password of the DJI Spark, set from the factory, in the DJI Spark's battery compartment or in the drone's purchase box

Method 2: Change the WiFi SSID and password of the DJI Spark by smartphone

Dji Phantom 3 Reset Wifi

Step 1: Connecting the DJI Spark drone to your smartphone

Step 2: Select Go Fly to enter the room of the DJI Spark

Step 3: Select the settings icon located at the top right of your smartphone monitor

Step 4: On the General Settings tab, select the Wi-Fi network icon to enter the network connection settings, where you can change the SSID network identifier s and access password.

Step 5: Select the Wi-Fi SSID item of DJI Spark

How To Reset Router Password

Step 6: in the pop up at the request Change Wi-Fi SSID, in the dedicated space, enter the new network name, select OK to confirm the change of the network name of DJI Spark

Step 7: Select the Wi-Fi Password item of the DJI Spark

Step 8: in the pop up at the request Change Wi-Fi Password, in the dedicated space, enter the new network name, select OK to confirm the change of the Internet password of DJI Spark

Step 9: After setting the new SSID and internet password of DJI Spark, select Apply, to finalize the new Wi-Fi connection settings of DJI Spark

Step 10: To make the changes operative, it is necessary to turn off and turn on the radio control of the DJI Spark again.

Through the use of the DJI GO 4 app and these few steps, you've learned how to change your connection access data with the SSID network name setting and the password for the DJI Spark Wi-Fi connection.

Reset Dji Spark Wifi Password